Quantification of the bisphosphonate alendronate using capillary electrophoresis mass spectrometry with dynamic pH barrage junction focusing

A quantitative method was developed for the direct identity confirmation and quantification of alendronate using CE-MS combined with a pH-assisted focusing technique, dynamic pH barrage junction focusing. A pH-induced variation in electrophoretic mobility led to online focusing of alendronate at the sample/pH barrage boundary, significantly improving the detection sensitivity. In addition, the use of a flow-through microvial CE electrospray interface and the multiple reaction monitoring mode of MS further improved the specificity and quantification capability of this technology. This quantitative method presented a wide linear dynamic range over 8–2000 ng/mL and an LOD of 2 ng/mL. A 460-fold improvement in sensitivity was obtained when pH barrage junction focusing was applied during the CE process, in comparison to when normal CE was conducted without online sample stacking. The superior detection sensitivity over previously reported methods enables direct analysis of bisphosphonate compounds, eliminating tedious pre-column sample enrichment and derivatization. Validation of alendronate content in a commercial drug tablet further proved the reliability and power of this method. This simple method with no sample derivatization, superior sensitivity, and short run time (<8 min) is a promising alternative for accurate quantification of alendronate and other types of bisphosphonate compounds in both drug formulations and plasma samples.     

Electrospray ionization stability and concentration sensitivity in capillary electrophoresis-mass spectrometry using a flow-through microvial interface

Concentration sensitivity is a key performance indicator for analytical techniques including for capillary electrophoresis-mass spectrometry (CE–MS) with electrospray ionization (ESI). In this study, a flow-through microvial interface was used to couple CE with MS and improve the ESI stability and detection sensitivity. By infusing a peptide mixture through the interface into an MS detector at a typical flow rate for CE-MS analysis, the spatial region near the interface was mapped for MS signal intensity. When the sprayer tip was within a 6 × 6.5 × 5 mm region in front of the MS inlet, the ESI was stable with no significant loss of signal intensity for ions with m/z 239. Finite element simulations showed that the average electric field strength at the emitter tip did not change significantly with minor changes in emitter tip location. Experiments were conducted with four different mass spectrometer platforms coupled to CE via the flow-through microvial interface. Key performance indicators, that is, limit of detection (LOD) and linearity of calibration curves were measured for nine amino acids and five peptides. Inter- and intraday reproducibility were also tested. The results were shown to be suitable for quantification when internal standards were used.     

单一基质白光荧光粉Na3Sc2(PO4)3∶Tm3+,Dy3+的合成及发光性质

采用高温固相法成功制备了Na₃Sc_2-x-y(PO₄)₃∶xTm³⁺,yDy³⁺荧光粉,利用X射线衍射仪、扫描电子显微镜和荧光光谱仪对荧光粉进行了物相、形貌和发光性能进行了表征。 在Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,yDy³⁺荧光粉中,物质的量分数6%的Tm³⁺和6%的Dy³⁺在360 nm激发下呈现出白光发射,其发射光谱在460~685 nm范围内存在Tm³⁺位于457 nm的特征发射峰,对应于Tm³⁺的³H₆→¹D₂跃迁,以及Dy³⁺位于483、577和672 nm处的3个特征发射峰,分别对应于Dy³⁺的⁴F_9/2→⁶H_15/2、⁴F_9/2→⁶H_13/2和⁴F_9/2→⁶H_11/2的跃迁。 观测到Na₃Sc₂(PO₄)₃∶Tm³⁺荧光粉的发射光谱与Na₃Sc₂(PO₄)₃∶Dy³⁺的激发光谱有较好的重叠,且Tm³⁺的荧光寿命随Dy³⁺浓度的增加逐渐降低,因此在Na₃Sc₂(PO₄)₃∶Tm³⁺,Dy³⁺荧光粉中存在Tm³⁺向Dy³⁺的能量传递。 利用Dexter和Reisfeld近似分析了能量转移机制,发现从Tm³⁺到Dy³⁺的能量传递临界距离为1.6 nm,能量传递过程是通过偶极-偶极相互作用进行的。 Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,0.06Dy³⁺荧光粉具有较好的耐受热猝灭性能,在423、473和523 K时的发射强度分别为298 K时发射强度的97.6%、89.2%和78.6%。 随着Dy³⁺浓度的增加,Na₃Sc₂(PO₄)₃∶0.06Tm³⁺,yDy³⁺荧光粉的发光颜色由蓝色转变为白色,再由白色变黄色。 Na₃Sc₂(PO₄)₃∶Tm³⁺,Dy³⁺荧光粉作为一种可调色或单相白光荧光粉在发光二极管上具有潜在的应用前景。     

Intelligent Surfaces Thermally Switchable between the Highly Rough and Entirely Smooth States

Reversible switching from a highly rough surface to another entirely smooth surface under external stimuli is crucial for intelligent materials applied in the fields of anti-fogging,self-cleaning,oil-water separation and biotechnology.In this work,a thermal-responsive liquid crystal elastomer (LCE) surface covered with oriented micropillars is prepared via a facile two-step crosslinking method coupled with an extrusion molding program.The reversible change of topological structures of the LCE surface along with temperature is investigated by metallographic microscope,atomic force microscopy and optical contact angle measuring system.At room temperature,the LCE sample is filled with plenty of micropillars with an average length of 8.76 μm,resulting in a super-hydrophobic surface with a water contact angle (WCA) of 135°.When the temperature is increased to above the clearing point,all the micropillars disappear,the LCE surface becomes entirely fiat and presents a hydrophilic state with a WCA of 64°.The roughness-related wetting property of this microstructured LCE surface possesses good recyclability in several heating/cooling cycles.This work realizes a truly reversible transformation from a highly rough surface to an entirely smooth surface,and might promote the potential applications of this dynamic-responsive LCE surface in smart sensors and biomimetic control devices.     

OLED器件新型应用研究进展

有机发光二极管(organic light-emitting diodes,OLED)具有可柔性制备、低驱动电压、低功耗等优点,近年来技术上的突飞猛进及其广泛的应用前景,使之成为平板显示、新型照明、可穿戴,以及智能电子产品开发中最热门的研究课题之一。作为新一代的显示及照明技术,小尺寸OLED显示器已实现商业化,大尺寸OLED电视和家用照明也有产品问世,但OLED器件在可穿戴、智能电子等领域的应用仍处于探索期。本文综述了近年来OLED器件在新型应用领域国内外的研究状况,介绍了其在车载照明、智能车窗、可穿戴医疗、智能包装等领域的发展。最后对OLED器件应用的未来发展趋势进行了展望。     

Toehold-mediated nonenzymatic amplification circuit on graphene oxide fluorescence switching platform for sensitive and homogeneous microRNA detection

A novel graphene oxide (GO) fluorescence switch-based homogenous system has been developed to solve two problems that are commonly encountered in conventional GO-based biosensors. First, with the assistance of toehold-mediated nonenzymatic amplification (TMNA), the sensitivity of this system greatly surpasses that of previously described GO-based biosensors, which are always limited to the nM range due to the lack of efficient signal amplification. Second, without enzymatic participation in amplification, the unreliability of detection resulting from nonspecific desorption of DNA probes on the GO surface by enzymatic protein can be avoided. Moreover, the interaction mechanism of the double-stranded TMNA products contains several single-stranded toeholds at two ends and GO has also been explored with combinations of atomic force microscopy imaging, zeta potential detection, and fluorescence assays. It has been shown that the hybrids can be anchored to the surface of GO through the end with more unpaired bases, and that the other end, which has weaker interaction with GO, can escape GO adsorption due to the robustness of the central dsDNA structures. We verified this GO fluorescence switch-based detection system by detecting microRNA 21, an overexpressed non-encoding gene in a variety of malignant cells. Rational design of the probes allowed the isothermal nonenzymatic reaction to achieve more than 100-fold amplification efficiency. The detection results showed that our strategy has a detection limit of 10 pM and a detection range of four orders of magnitude.     

Terpenoids from the Stems of Drypetes congestiflora

Two new eremophilane‐type sesquiterpenoids, 1α‐hydroxyeremophila‐6,9,11‐trien‐8‐one ( 1 ), 4α‐hydroxyeremophila‐1,9‐diene‐3,8‐dione ( 2 ), and a new friedelane‐type triterpenoid, friedelane‐3α,16β‐diol ( 4 ), along with six known terpenoids, 3 and 5 – 9 , have been isolated from the stems of Drypetes congestiflora. Their structures and relative configurations were elucidated on the basis of detailed spectroscopic analyses and by comparison of their NMR data with those reported in the literature. All of the compounds, 1 – 9 , were isolated for the first time from this species. Compound 3 exhibited moderate cytotoxic activities against the A549 and B16F10 cell lines.     

Three‐Component Reaction of Pyrimidin‐2‐yl Sulfonates with Sodium Azide and Alkynes: An Efficient Approach to C2–Triazolo Functionalized Pyrimidines

Pyrimidin‐2‐yl sulfonate, as an efficient reaction partner, can be easily prepared from cheap commercial materials, reacted with sodium azide and alkynes to give C2‐triazolo functionalized pyrimidines in good yields under mild reaction conditions. This procedure eliminates the need to handle organic halides or organic azides, as they are generated in situ, making this already powerful click process even more user‐friendly and safe.